What else is more appealing than steel as more
and more buildings are using steelwork to display creative designs; so the
imminent requirement of fireproof that steel with intumescent coatings is in
high demand? Thin film Intumescent coatings for structural steel help the
Architects and Engineers continue their creative vision and enhance the
buildings aesthetics by letting their steel designs shine through. When it
comes to fire safety, it is mandatory in building construction to offer
suitable solutions and Fireproofing on steel
is one of them but the process of Steel Fireproofing
also includes government authorization.
Normally preservation of Fireproofing Products
requires certain authorization & certifications from structural steel qualification
lists. Basically, certification is based on a fire test on a high temperature
measurement definite through international standards that organizes and
controls the test process. Basically test criteria for steel proofing are said
to be below the 400 degree C limit in Japan, unlike Europe, North America and
China which reaches the 540 degree C limit. These tests are measures to
describe the fire resistance ratio during outbreak.
In today’s scenario, most challenging issues in
the Fire Protection Industry is reserved vs. unreserved assemblies, thus it is
most important to understand this properly as misunderstanding of such
significant subject leads to insufficient fire protection as well as untimely
failure of the protected structured steel constructed building.
Many people are not aware about the fire test
procedure which is used to intend Passive Fire Protection for structural steel
identifies couple of different types of end support for beams tested in roof
and floor assemblies. The base end of beams can be tested in completely
reserved or completely unreserved condition. There are many advantages of Fireproofing in
general environment like it dry air and offers low IR signature. The system is built
in a way that one can easily apply and use. It protects against weathering and
deterioration, which is also unaffected by rapid changes in temperature. Also
it provides amazing resistance to thermal shock and no loss of adhesion at high
temperatures.
However, the open steel normally requires Fireproofing Spray
as it is compact in size. Further it requires high amounts of plaster spray
which vaporizes during coating the metal. Currently structural steel requires
outsourced fireproofing to prevent the steel from getting weaker when projected
to the fire. During heating process, metal expands and becomes softer and
eventually loses the complex integrity which it used to have. By satisfying
size of energy the metal melts as well as turn into solution. The behavioral
heat to the steel could be taken into lower degree temperatures with the help
of appropriate fireproofing substances.
About:
At Fire Security Systems (www.fire-security.net), our range of Firestopping Intumescent Coatings are one of the thinnest in the
market, with BS476 approvals for Interior and Exterior steelwork, UL Approvals
for Interior Steel and LEEDS approval for our 470 KS Steel Coating. Fire
Security Systems offer four types of variations of thin film Intumescent Coatings
for your structural steel requirements mainly FS370 comes with BS476 Approved
for interior Applications, FS370 comes with BS476 Approved for Exterior
Applications, FS470 comes with BS476 Approved for interior Applications and
FS490 comes with UL/ULC Approved for interior Applications.
